Resetting Oil Service
Indicator Lights
Lincoln
Lincoln LS,
Aviator, 2000-06 Navigator, 2005,
Town Car
To reset CHANGE
OIL SOON/OIL CHANGE REQUIRED
message on the Message
Center, press the STATUS control to
access the System Check mode.
Press RESET button to display
“OIL LIFE _% RESET FOR NEW”.
Press and hold RESET button until
“OIL LIFE IS 100%” is
displayed.
Lincoln Mark VIII,
1993-97
When “CHANGE OIL
SOON” or “OIL CHANGE REQUIRED” is displayed on Message Center, turn
ignition on. Press and hold OIL CHANGE RESET or RESET button until
OIL LIFE RESET TO 100% is displayed on Message Center.
Lincoln
Continental, 1989-94
When “SERVICE” is
illuminated on Message Center, press the SYSTEM CHECK (A) button on
the right of the display. Then press the RESET (B) button. The
“SERViCE” symbol and mileage will start to flash. Next, press SYSTEM
CHECK (A) and RESET (B) buttons at the same time. The display will
show “7200 miles/i 1,580 km” and will count down from there as long
as the buttons are depressed. Release the buttons at the mileage you
want the customer to observe for service.
Lincoln
Continental, 1988
When “SERVICE DUE”
is illuminated on Message Center, press the CHECK OUT (A) button
located below the display. Then press the RESET (B) button. The
display should now read “SERVICE DONE?” Next, press the CHECK OUT
(A) and RESET (B) buttons at the same time. The display will show
“7200 miles/i 1,580 km” and will count down as long as the buttons
are depressed. Release buttons at the mileage you want the customer
to observe for the next service.
|
